Click To Call(656) 254-5623Click To Get A Free Estimate
Couple kneeling on dark herringbone pavers beside a brick home, checking the sealed color up close

Brick pavers sealed to keep their color

Brick Paver Sealing in Land O' Lakes, FL

Call (656) 254-5623 to have a local contractor price sealing for your Land O' Lakes brick pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-5623
Brick sealing

Can my brick pavers be sealed in Land O' Lakes, and how soon?

A local contractor seals brick pavers across Land O' Lakes, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free and there is no pressure to book. To begin, call (656) 254-5623.

Brick pavers look warm and rich when they are new, then the sun bleaches them, joint sand washes away and the faces go chalky. A sealer coat darkens and evens the color again, and it makes the surface easier to rinse, so algae and dirt have less to grip. Tell the contractor whether your pavers are clay or concrete when you get a free estimate.

Call (656) 254-5623

Are my pavers clay brick or concrete, and does it matter?

It matters for the product choice. A Tampa Bay sealing company says it seals both clay brick and concrete pavers, notes that most driveways here are concrete pavers, and matches the cleaner, sand and sealer to each material. Plenty of homes have both, with a clay look on the walk and concrete on the drive. To have the material identified at the visit, get a free estimate.

Natural stone is a third case. Rusty's Pro Wash & Seal says natural stone needs special cleaners and stone-specific sealers, which can add to a bid. If your walkway is travertine or another stone, read about it separately and call (656) 254-5623.

Wide broom pushing fine sand into the seams of herringbone pavers, one cleaned side next to a darker side
Why choose us

Why should a sealer for brick pavers be breathable?

A second sealing company names a breathable urethane so moisture can escape from the pavers. It also says a milky or white look usually means a non-breathable sealer trapped moisture, and a failed coat can be stripped and redone at a separate price. In a damp county like this one, trapped water is the main risk. To ask what a contractor will use, call (656) 254-5623.

Unilock explains why the white haze deserves a diagnosis. Natural salts called efflorescence can rise through new pavers for 2 to 3 months and up to a year, and sealing before they clear is a mistake. Unilock puts the wait for new pavers at 60 to 90 days. Give the install date when you get a free estimate.

Which finish looks best on brick: natural, semi-gloss or high gloss?

A second sealing company lists natural, semi-gloss and high gloss, with high gloss giving the deepest color and natural keeping the surface looking dry. A Land O' Lakes company names four finishes in its water-based acrylic urethane: natural, mid-gloss, gloss and high gloss. Rusty's says the wet look is what most Tampa Bay homeowners ask for. Ask to see a sample on your own brick when you get a free estimate.

Think about where the brick is. A drive can carry high shine, while a pool surround or a front step usually wants less. Sealer on brick that gets wet should keep some grip. To talk through it, call (656) 254-5623.

Pricing

What does brick paver sealing cost in Land O' Lakes?

No published page prices brick on its own, so the table below is built from the published pieces. Rusty's Pro Wash & Seal gives $1.25 to $2.50 per square foot for a clean, sand and seal, a Land O' Lakes page gives $1.00 to $1.75, and Unilock prices the sealer alone at $80 to $150 a gallon. Brick needs the same steps as other pavers, so the same rates apply. To price your brick, get a free estimate.

Sealer coverage shows why the labor is the larger share. Unilock says a gallon of water-based sealer covers about 100 to 150 square feet and solvent-based covers about 80 to 120, so a 1,000 square foot area uses 7 to 12 gallons. That is material, before washing, drying, sand and application time. Call (656) 254-5623 for the whole figure.

ItemPublished figureSource
Clean, sand and seal, Tampa Bay$1.25 to $2.50 per sq ftRusty's Pro Wash & Seal
Clean, sand and seal, Land O' Lakes homes$1.00 to $1.75 per sq ftRusty's page for Land O' Lakes
Jobs of 3,000 sq ft and up$1.00 to $2.00 per sq ftRusty's Pro Wash & Seal
Minimum charge on small jobs$500 to $1,000Rusty's Pro Wash & Seal
Water-based sealer, material only$80 to $150 a gallon, 100 to 150 sq ftUnilock
Solvent-based sealer, material only$80 to $150 a gallon, 80 to 120 sq ftUnilock

Example: 600 square feet of brick lands at $750 to $1,500 on the Tampa Bay rate. Stripping an old coat and resetting pavers are not priced in any page found and are billed separately.

Get a Free Estimate

How it works

How does the brick paver sealing process run?

A second sealing company gives the order below, and the Land O' Lakes company above agrees on washing, drying, sanding and then sealing. Its joint stabilizing sealer locks the sand so rain moves less of it. To ask how a contractor does each stage, call (656) 254-5623.

1. Look and photograph

The contractor walks the area, takes pictures and confirms the price in writing.

2. Deep clean

Eco-friendly cleaners and professional washers lift dirt, algae and mildew.

3. Sand and lock the joints

Joint stabilizing sand is swept and compacted, then locked with a stabilizing sealer.

4. Seal when dry

A breathable urethane goes on, with a color enhancer for faded tones or a non-slip additive where needed.

5. Final inspection

After cure, the work is checked. A second sealing company says foot traffic waits 24 hours and vehicles wait 48.

Photos

How does sealed brick look on Land O' Lakes patios and walks?

Freshly sealed paver driveway along a brick walkway in Land O' Lakes
Sealed paver pool deck along a brick walkway in Land O' Lakes
Sealed paver patio behind the home along a brick walkway in Land O' Lakes
Sealed paver walkway to a front door along a brick walkway in Land O' Lakes
Close view of freshly sealed pavers along a brick walkway in Land O' Lakes
Paver area with one cleaned half beside a dirty half along a brick walkway in Land O' Lakes
Contractor cleaning pavers along a brick walkway in Land O' Lakes
Contractor sealing or sanding pavers along a brick walkway in Land O' Lakes

What signs say brick pavers are ready for a new coat?

A second sealing company lists two plain signs: rain no longer beads on the surface, and joint sand keeps washing out while weeds return. A chalky look is a third, since UV bleaches unsealed pavers. In Land O' Lakes you can add a green film on shaded edges, which Rusty's ties to the canopy and moisture. Any one of these is enough to ask for a look. To book one, call (656) 254-5623.

A milky or hazy patch is a different signal. It can be efflorescence, the white salt haze Unilock describes, or moisture trapped by a coat that cannot breathe. Telling the two apart decides whether the fix is a wait, a wash or a strip. Point the patch out when you get a free estimate.

What should a brick paver quote spell out in writing?

A second sealing company confirms the price in writing after the walk-through, and that is a good habit to ask for from anyone. The quote should name the sealer, say whether it is breathable and list the finish. It should also say how the joint sand is handled, how many coats go on and what drying and cure times apply. To ask a contractor for those lines, call (656) 254-5623.

Ask about the extras too. Rusty's says a minimum charge of $500 to $1,000 covers small jobs, tint costs extra and stripping old sealer is a separate matter. A clear quote lists each of them, even when the amount is zero. For a written number, get a free estimate.

Can tired brick be refreshed between full coats?

Often, yes. A second sealing company suggests a maintenance clean within 10 to 15 months of sealing, which keeps algae and dirt from building up on the coat. It also warns against stacking a new coat over one that still works. A yearly wash costs less than an early reseal and keeps the surface open to the sun. To set up a wash, call (656) 254-5623.

Do sprinklers and hard water leave marks on brick pavers?

They can. Rusty's says hard water mineral deposits build up faster on unsealed surfaces, and its cost page names sprinkler heads that hit the same spots among the causes of local wear. Brick beside a lawn bed often shows a ring of orange or white where the spray lands. A sealed surface lets those deposits rinse off more easily. To show a contractor your worst ring, get a free estimate.

Aim matters as much as the coat. Turning a head a few degrees away from the paving, or shortening its arc, costs little and spares the brick between washes. The timer also has to stay off while a new coat cures, which Unilock asks for. Ask the contractor which zones to shut off when you call (656) 254-5623.

Which brick area should be sealed first if the budget is tight?

Start where the wear is worst. A sunny front walk or driveway apron bleaches first, according to a second sealing company, and a shaded back landing grows algae first, per Rusty's. Each fails in a different way. Splitting a job costs more per foot, since Rusty's says fixed costs and the minimum charge rise on small areas, so ask for both prices. To compare, call (656) 254-5623.

How often should brick pavers be resealed in Land O' Lakes?

A second sealing company says every 2 to 3 years on a driveway in daily sun and closer to 4 on a shaded patio. Rusty's gives 3 to 5 years across pavers, and Unilock says a solvent-based sealer lasts about 4 to 5. The sun and traffic each area gets set the real date. To have a surface read, call (656) 254-5623.

A second sealing company also suggests an annual maintenance clean between coats and warns that sealing too often can trap moisture. The signs a coat is due are rain that no longer beads and joint sand that keeps washing out as weeds return. To have a contractor check, get a free estimate.

Does the Land O' Lakes climate change how brick ages?

It speeds the cycle. Rusty's says a heavy tree canopy holds moisture on pavers, while frequent rain, humidity and Florida UV erode joint sand and fade color. Pasco County is humid subtropical, with about 8 to 9 inches of rain a month from June through August, according to Wikipedia. Brick under oaks may go green while brick in the sun goes chalky, even on the same walk. To describe your yard, call (656) 254-5623.

Want brick that holds its color for the next few years?

Phone or send the short form, and a contractor responds within 1 business day, often within hours.

Call (656) 254-5623

Free, no obligation

Questions

What do Land O' Lakes homeowners ask about sealing brick pavers?

Can I seal my pavers myself?

Some homeowners do, and Unilock publishes a tool list: a pump-up sprayer, a foam or short pile roller and a stiff broom. Timing is the hard part, with 50 to 90 degrees needed and clear skies 24 to 48 hours before and after. A contractor who knows brick can also match the sealer to the material.

How often should I seal pavers in Florida?

Rusty's Pro Wash & Seal says 3 to 5 years for most pavers. A second sealing company says every 2 to 3 years for a driveway in daily sun and closer to 4 for a shaded patio.

Which paver sealer works well in Florida?

That depends on the brick and the use. A second sealing company names a breathable urethane so moisture can escape, and a Land O' Lakes company uses a water-based acrylic urethane in four finishes. Ask any bidder for the product name and the number of coats.

What is the average cost to seal pavers in Florida?

Rusty's Pro Wash & Seal puts a typical Tampa Bay clean, sand and seal at $1.25 to $2.50 per square foot, with large jobs near $1.00. A Land O' Lakes page gives $1.00 to $1.75. No page prices brick alone.

Do I need to clean pavers before sealing them?

Yes. Rusty's warns that sealing over stains or algae can trap them for good. A second sealing company puts a deep clean ahead of joint sand and sealer in its process.

Do you seal clay brick as well as concrete pavers?

A Tampa Bay sealing company says it seals both and that most Tampa Bay driveways are concrete pavers. It matches the cleaner, sand and sealer to each material instead of using one product on everything.

Why does my sealed brick look milky or white?

A second sealing company says a milky look usually means a sealer that is not breathable has trapped moisture, and that a failed coat can be stripped and redone. Unilock separately describes efflorescence, a white haze of natural salts that can show for 2 to 3 months and up to a year.

Does the Land O' Lakes sun fade brick pavers?

Yes. A second sealing company says UV bleaches unsealed clay and concrete pavers to a chalky look, and a Land O' Lakes company lists Florida UV as a cause of fading here.

Which finish suits brick pavers?

A second sealing company offers natural, semi-gloss or high gloss, with high gloss giving the deepest color and natural keeping a dry look. Rusty's calls wet look the most requested finish around Tampa Bay.

Service area

Where can a contractor seal brick pavers near Land O' Lakes?

Brick sealing jobs are open in Land O' Lakes and in every place below, from the lake country of southern Pasco to the Gulf side and the Pinellas edge. A street that is not named can still be asked about by phone at (656) 254-5623.

Ready to bring your brick pavers back to life?

Call or use the form, and a contractor writes back within 1 business day, often much sooner.

Call (656) 254-5623

Free, no obligation